Description

Our UV1's high intensity output lamp, along with the stainless steel reflecting chamber provides a total of 90,000 micro-watts inside the disinfecting chamber. At this level 99.9% of the Viruses, Algae, Spores and Bacteria listed below will be destroyed.

Pond or pool water containing unwanted contaminates enters the EP unit's wet chamber and is exposed to the light rays generated by the UV bulb.

The EP unit has been designed to allow for some turbidity in the water, as turbidity will reduce the UV light wave transmission capability. Therefore, all EP units are sized for a minimum two second exposure time to allow for possible turbidity in the water and the reduction in the killing power of the UV bulb when it nears the end of its useful life. When the incoming water is exposed for this duration, the water exiting the unit is near drinking water biological quality.

Product Information:

• Stainless Steel Housing - 6" Diameter (8" Shorter than optima)
• Four Models 36W (5,000 Gal) 52W (10,000 Gal) 86W (25,000 Gal) 119W (40,000 Gal)
• 120V/50/60 Hz  1 Watt Amp draw
• Electronic Ballast - Two Ballasts fit all four models (EP5, EP10)(EP20, EP40)
• 8 Ft. Power Cord - NEMA Plug
• Cord Connected All Weather GFCI (Optional factory installed or field installed Kit)
• Stainless Steel Quartz Seal Sleeve
• Pressure Switch Dry Fire Control
• Pressure Gage
• Stainless Steel Base
• Internal Flow Diverter
• Clear PVC Union Outlet - 2" Socket
• PVC Union Inlet - 2" Socket
• Plastic Electrical Enclosure
• Bulb Cushion and Bulb Centering Rings
• Individual Carton Packaging suitable for Truck Shipping
• Optional Individual Carton Packaging suitable for UPS Shipping
• Aquatemp Limited Warranty - Unit and Ballast -5Years, Bulb-1Year (9000 Hours)

Desired UV Unit Flow Rates For Ponds